Quality Bronze Door Hardware, Gate Hardware & Shutter Door Hardware 
Phone: 877-227-6603 | Fax: 888-778-7889 
home hardware
HOME
home hardware
BRONZE GATE
HARDWARE
home hardware
home hardware
GATE HARDWARE
SHOWROOMS
home bronze hardware
PICTURE GALLERY
bronze home hardware
CONTACT US
 
home hardware
 

Care for your Bronze Home Hardware

Good maintainence can give you a lifetime of beautiful bronze gate hardware!

Never use spray or liquid furniture polishes to clean your bronze hardware. These polishes may contain oils which could damage the original patina finish.

In climates with higher humidity, or if you live where there is a higher concentration of airborne pollutants, cleaning and waxing may be needed twice a year.

Applying Wax
All bronze darkens with age, however waxing may slow the process of oxidation.
To apply the wax, you need two - one to two inch paint brushes that will be used only for cleaning your bronze. Do not use brushes that you have used for other purposes as chemicals may remain in the bristles and if transferred to the patina finish, may cause permanent discoloration.

Start by applying a protective circle of tape around the metal ferrules that hold the bristles in the brushes you are using. This will help prevent scratching of the surface when applying the wax and when dusting.

Wipe your bronze free of any dust and fingerprints using a clean, dry, cotton cloth. Use one of the brushes to remove dust from small crevasses or hard to reach places.
Use "Renaissance" wax, or other "microcrystalline" waxes in most cases, because it is inert and will not yellow over time. Apply to the second brush, use three or four, back and forth, sweeping strokes. Do not dab your brush in the wax. This could cause an abundance of wax to be applied to the bronze that could actually harm the patina surface. Dab your brush on the lid of the wax can to remove any excess wax. Lightly apply a super thin coat of wax to the surface of the bronze using gentle sweeping motions. Apply more wax to the brush as described, working it down into crevices.
Caution - Using too much wax may remove previous layers of wax. It is very important not to apply too much wax or work it into the surface to vigorously. Cover the entire surface with wax and let it dry according to the directions on the container.

Separate Brushes
Keep your brushes separately in labeled bags, free from other contaminants, for future use. Using a clean, dry, cotton cloth, gently rub in a circular motion, the dried wax from the bronze surface until you achieve the desired shine. To achieve a dull surface, do not rub the surface after waxing.

To achieve a better protective coating, you may want to re-apply a second coat using the same technique.

Outdoor Bronze Hardware
Outdoor bronzes require a maintenance program which keeps their surfaces clean and waxed on a regular basis.



 
 
HOME  |  BRONZE GATE HARDWARE  |  GATE HARDWARE SHOWROOMS  |  BRONZE GATE HARDWARE PICTURES  |  CONTACT US
This site is copyright ©2008 by Coastal Bronze. All rights reserved.
All product lines & names are protected trademarks of their registered owners and no claim is made otherwise.